U-STIM-PRODUCT LINE-STIMULATION CHEMICALS

     

                                                                    

           

 AMERICAN OILFIELD CHEMICAL MANUFACTURER                                                                                    

"GIVING THE WELL WHAT IT NEEDS!"      

STIMULATION CHEMICALS

U-STIM PRODUCT LINE


UDF'S stimulation chemicals are offered based on your chemicals requirements. A number of acid products are available in conjunction with corrosion inhibitors, chemicals washes and or cement pre-flushes. Products needed for pickling acid jobs are also available. ALL PRODUCT LITERATUE CAN BE OBTAINED BY CONTACTING info@uniquedrillingfluids.com


 STIMULATION ACIDS

U-STIM-L --- LA - LE (Liquid HCl 3 -  32%% are various strengths of liquid HCl used to stimulate oil and gas wells. The available strengths are catergorized by percentage of active HCl and are made up as follows:: LA-3%, LB-15%, LC-28%, LD-31.5%, LE-32%

U-STIM-SOL-X is a specific blend of HCl snd HF to rid of damaged clay and silt minerals. It is  highly effective as two acids combined are stronger than one alone.

U-STIM-SOL-ABF is a component added to the HCl to make the mud acid. Once formulated the mud acid dissolves siliceous material that clogs hydrocarbon flow channels therby decreasing production.

U-STIM-SOL-XF is a acidizing product applicable in oil and gas wells that are need of stimulation. U-STIM-SOL-XF works slowly with carbonate formations and can be inhibited at temperatures up to 350 F.

NOTE: PLEASE CONTACT INFO@UNIQUEDRILLINGFLUIDS.COM FOR TECHNICAL LITERATURE

 


STIMULATION CORROSION INHIBITOR

U-CI-STIM-23 is a formulated product designed to protect metal surfaces from corrosion due to strong acids such as HCl and HF during acidizing operations.

 

U-CI-STIM-23HT is a formulated product designed to protect metal surfaces from corrosion due to strong acids such as HCl and HF during acidizing activity. It is easily dispersed in water and solutions of acids. It is effective at temperatures up to 400 F and with acid solution strengths of up to 30% w/w.



 STIMULATION ANTI-SLUDGE ADDITIVES/ DIVERTING AGENTS

U-STIM-AS-37 is a blend of long chain polymers with a high level of surfactancy. It is designed to improve the condition of the stimulating acid.

U-STIM-DA-50 is an organic material in flake form and is slowly soluble in water, acid, oil and gas. It can be placed in a viscous carrier between treatment stages at concentration of 20 to 90 lbs.bbl.

 


 STIMULATION FOAMING AGENTS/ MUTUAL SOLVENT

U-STIM-FOAM-46 is an effective foaming agent used primarily in acid stimulation fluids. It is formulated using betaines and a stabilizing surfactant. The normal usage is 0.2-1.0% volume of acid.

U-STIM-MS-49 is a mutual solvent for use in oil and gas well matrix acidizing. The primary reason for using mutual solvents in acidizing silicate formations is to reduce or prevent the adsorption of surfactants out of the acid onto the formation, especially where cations are being used.

U-STIM-PS-51- is a surfactant which provides acids with improved wetting characteristics and thereby allows better contact with the formation, oily scales and oily surfaces, and helps prevent water blocks. It also disperse acid insoluble fines released during acidizing treatments. Pilot test should be run to determine what, if any non-emulsifiers are required in the acid.

 


 AMPHOTERIC ACID RETARDER and EMULSIFIER

U-STIM-MUL-RT9 is a multi purpose surfactant that prepares and stabilizes an oil in acid emulsion for use in acidizing operations. The resulting emulsion allows for reduced acid reaction rate and deeper penetration into the formation. in addition, the dispersion gives simultaneous organic solvent acid contact on the formation being treated.

 


GELLANTS

U-STIM-GEL-P is a rapidly hydrating polymer used for thickening water base systems. This product does not contain any internal breakers.

U-STIM-GEL-VSE is a non-polymeric surfactant used to produce self-divering fluids in acid stimulation. It will also act as a foaming agent in acid.


NON-EMULSIFIERS

U-STIM-NE-15 is a non-emulsifier in a blend of non-ionic surface acitve agents formulated to prevent the occurence of emulsions of aqueous stimulation fluids in crude oil. U-STIM-NE-15 can be used in pre-flushed fluids, acid solutions and fracking fluids.


IRON STABILIZERS

U-STIM-STAB-Fe3+ is used to prevent FeOH3 in spent HCl. FeOH3 precipitate as gelatinous matter and the pH of HCl rises above 2.1.

 


ASPHALTENE and WAX SOLVENTS

U-STIM-WX-AS-17 is an oil soluble, aromatics free solvent system which can be used in the treatment of organic deposits containing waxes and asphaltenes and pipe dope residues. It will help to clean casing and tubing surfaces prior to well completion, stimulation, gravel pack placement and cementing.

 


STIMULATION FRICTION REDUCERS

U-STIM-FR-11 reduces friction pressure losses during stimulation treatments thus allowing an injection rate with lower horse power and therefore lowering cost. This is a critical especially when coil tubing is used. The reduction in friciton is dependent upon the type of fluid, concentration, concentration of polymer, pipe size and fluid viscosity.


STIMULATION BACTERIOCIDES

U-STIM-BAC-BLAST-101 is a non-ionic bacteriacide for use in water base fracking fluids. The recommended concentration is 15 kgs per 1000 gal. of water. Complete control is acheived over anerobic sulphate reducing bacteria and aerobic slime producting bacteria. It has very low foaming properties. It is corrosive to steel, aluminum, tin and zinc. It should be stored in suitable container.

 

 


STIMULATION SHALE INHIBITORS

U-STIM-SH-L is a temporary clay stabilizing additive that prevents clay particles from migrating in water sensitive formations that contain migrating clays.